Cyclone separator is a device for gas-solid or liquid-solid separation. The working principle is that the solid particles or liquid droplets with large inertial centrifugal force are separated from the outer wall surface by the rotational movement caused by the tangential introduction of the air flow. Cyclone separator is generally used as a pre-separator to reduce the dust load reaching the final filter, or as a protective device to remove larger hot particles in the gas and prevent damage to the filtering material in the subsequent stage. When used with the final filter, the cyclone separator better mixes the particle size of the filtered material to help extend the life of the filtered material.
The gas enters the cyclone separation zone through the inlet of the equipment. The airflow is strongly rotated by the guide of the guide vanes. The airflow spirals down into the cyclone barrel along the cylinder. The dense dust particles are thrown to the wall by the centrifugal force. , And fall to the ash bucket along the wall of the cylinder under the action of gravity. The rotating airflow contracts in the cylinder and flows to the center, and forms a secondary vortex upward from the air pipe and flows out from the top of the device.
Equipment structure diagram
--单管旋风子 Cyclone separator --single tube cyclone --多管旋风子 Cyclone separator --multi-tube cyclone
It is mainly used in situations where solid and liquid particles need to be removed efficiently, especially for large particles larger than 10 μm. The separation effect is better, and it can protect the post-filtration equipment.
适用于高浓度粉尘场合； ● Suitable for high dust concentration occasions;
经济高效； ● Cost-effective;
结构简单、操作维护方便； ● Simple structure, convenient operation and maintenance;
处理大颗粒的效率更高； ● Higher efficiency in processing large particles;
对于超过10μ微米的颗粒，效率约为90%，可达98%以上； ● For particles larger than 10 μm, the efficiency is about 90%, which can reach more than 98%;
可提供GB150设计； ● Can provide GB150 design;
The company has a standardized production workshop, a number of sheet metal equipment, welding equipment, metal processing equipment and lifting equipment, with independent testing equipment, perfect means.
设备选型、安装、使用、维护保养等技术咨询，提供产品及系统设计方案。 The company has professional engineers responsible for free pre-sales technical services, including: technical advice on equipment selection, installation, use, maintenance, etc., to provide product and system design solutions.
2. Sale service
Under the contract principle, we will further optimize the product according to the user's use situation to ensure that the user is convenient to install and use. When the product is installed, if we need assistance in commissioning, we will send personnel to the field service.
3. After sales service
7 * 24 hours operation and maintenance service. During the warranty period of the product, we will repair it free of charge if it meets the conditions of use and operates correctly. Provide lifelong repair service for the products sold.
Application: Industrial dust treatment Client: A company in Jiangsu Overview: Use 1 set of cyclone separator, the air volume is 30000m3 / h
Application: Industrial dust treatment Client: A company in Jiangsu Overview: Use a set of cyclone separators, the air volume is 20000m3 / h